MacDon M200 Manuel de l'opérateur télécharger pdf (Page 94)

HEADER OPERATION - D SERIES

Form 169017 / 169087 / 169095 92 Revision C

e. Remove pin from location (D) to disengage float

springs, and insert in storage hole (E). Secure

with lynch pin.

IMPORTANT

To prevent damage to the lift system when

lowering header lift linkages without a

header or weight box attached to

windrower, ensure that float engagement

pin is installed in storage location (E), and

not installed at hole location (D).

f. Disengage lift cylinder stops.

g. Start engine, choose a level area, and lower

header to the ground. Stop engine, and remove

key.

h. Disconnect header drive hydraulics (F) and

electrical harness (G) from header. Refer to the

Draper Header Operator’s Manual.

i. Disconnect reel hydraulics (H), and store on

bracket at windrower LH side.

(continued next page)

HEADER DRIVE HOSES

REEL HYDRAULICS

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 233 234

Pas de commentaire

MacDon M200 Manuel de l'opérateur Page 94