MacDon M200 Manuel de l'opérateur télécharger pdf (Page 170)

MAINTENANCE AND SERVICING - M200 ENGINE

Form 169017 / 169087 / 169095 168 Revision C

e. Remove radiator cap.

f. Place a drain pan [about 8 U.S. gallons (30 litres)]

under the engine and radiator.

CAUTION

To avoid personal injury from hot coolant, do

not open valve until engine cools.

g. Open radiator drain valve (B).

h. Open heater shutoff valve (C).

CAUTION

To avoid personal injury from hot coolant, do

not remove plug until engine cools.

i. Remove drain plug (D) in engine block so that

coolant drains. It is located at the forward right

hand end on the block.

j. When system is drained, replace drain plug in

block (D), and close radiator drain valve (B).

k. Fill system with clean water through the radiator

filler pipe (A), and replace radiator cap.

l. Start engine, and turn cab temperature control

knob to high. Run engine briefly.

(continued next page)

¼ - 18 NPS

1 2 ... 165 166 167 168 169 170 171 172 173 174 175 ... 233 234

Pas de commentaire

MacDon M200 Manuel de l'opérateur Page 170