MacDon M200 Manuel de l'opérateur télécharger pdf (Page 32)

OPERATOR’S STATION

Form 169017 / 169087 / 169095 30 Revision C

5.17.3 GROUND SPEED LEVER (GSL)

HEADER SWITCHES

The GSL (A) contains switches for the following

header functions that are most often adjusted

while in operation to suit changing crop conditions.

All are momentary type switches.

A decal that identifies the switch functions is

located on the cab post above the Operator’s

console.

5.17.3.1 Display Selector Switch

Selects and displays the settings in the CDM (B)

top line read-out for each of the header controls.

• Press switch to scroll through settings.

5.17.3.2 Reel Position Switches

The reel position switches perform the following

functions, depending on CDM programming, and

which header is attached:

• Double Windrow Attachment (DWA) Position

on Draper and Auger Headers. See Section

6.4.7

• Reel Fore-Aft Position and Height on Draper

Headers. See Sections 6.5.4 and 6.5.5.

• Grass Seed Drum Position on Rotary

Headers. See Section 6.7.4.

• Center-link Assist Cylinder. See Sections

6.5.1, 6.6.1, or 6.7.1.

NOTE

Refer to the specific Header section in this

instructional manual for detailed switch

operating modes.

DISPLAY

SELECTOR

REEL UP

REEL AFT

REEL FORWARD

REEL DOWN

DWA DOWN

DWA UP

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 233 234

Pas de commentaire

MacDon M200 Manuel de l'opérateur Page 32