MacDon M200 Manuel de l'opérateur télécharger pdf (Page 16)

SET-UP INSTRUCTIONS

Form 169216 January 2009

49. The program in the tractor monitor needs to

be changed to recognize the DWA.

a. Turn the key on. Press PROGRAM and

SELECT at the same time. Select YES

for Tractor Setup. Toggle between YES

and NO by pressing the ARROWS.

b. Scroll through the menu until display

reads “DWA INSTALLED?” and select

YES.

c. Display will then read “SWAP DWA

CONTROLS?”

d. The option exists to raise and lower the

DWA with either the reel fore/aft switch

or the rocker switch (F) installed earlier.

If YES is selected, the DWA up/down

will be controlled with the reel fore/aft

switch and reel fore/aft (D60 headers

only) will be controlled with the rocker

switch. If NO is selected, the DWA

up/down will be controlled with the

rocker switch.

e. The display will then read “EXIT DWA

MENU?” Select YES. Press

PROGRAM to revert monitor back to

operating mode.

SAFETY SIGN LOCATIONS

PART NO. 172736 – PINCH POINT

LOCATED ON LINKAGE ARM (BOTH SIDES)

PART NO. 134070 –

HIGH PRESSURE HYDRAULICS

LOCATED ON DECK

PROGRAM

SELECT

ARROWS

REEL UP

REEL AFT

REEL FORWARD

REEL DOWN

DWA DOWN

DWA UP

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 40 41

Pas de commentaire

MacDon M200 Manuel de l'opérateur Page 16