MacDon M200 Manuel de l'opérateur télécharger pdf (Page 34)

UNLOADING AND ASSEMBLY

Form 169018 32 Revision C

STEP 11. LUBRICATE MACHINE

Recommended Lubricant

SPEC DESCRIPTION USE

SAE Multi-

Purpose

High Temp. Extreme

Pressure (EP2)

Performance With 1% Max

Molybdenum Disulphide

(NLGI Grade 2)

Lithium Base

As Required

Unless

Otherwise

Specified

a. Wipe grease fitting with a clean cloth before

greasing, to avoid injecting dirt and grit.

b. Inject grease through fitting with grease gun until

grease overflows fitting, except where noted.

c. Leave excess grease on fitting to keep out dirt.

d. Replace any loose or broken fittings immediately.

e. If fitting will not take grease, remove and clean

thoroughly. Also clean lubricant passageway.

Replace fitting if necessary.

f. Refer to the following illustrations for identifying

the various locations that require lubrication.

(continued next page)

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 54 55

Pas de commentaire

MacDon M200 Manuel de l'opérateur Page 34